How to Install a Ghost Immobiliser
A ghost immobiliser protects your vehicle from key cloning or hacking. It prevents the engine from running until a PIN code has been entered. It can be as long as 20 characters.
This additional layer of security isn't visible to thieves who may not be aware of it. Certain systems also come with an application that allows owners to disable the immobiliser if they forget their PIN code, or to use a service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser is a cutting-edge security system, can be incorporated directly into the ECU of your vehicle. It is a subtle security barrier against thieves. It is highly efficient and user-friendly, making it a valuable addition to your vehicle's security arsenal. Like all anti-theft devices it's not foolproof, and requires regular maintenance to function effectively. This guide will help you get the most of your Ghost 2 immobiliser.
CAN (Controller Area Network) is a reliable serial networking that allows microcontrollers to communicate with each over short distances. A central control unit is not required. It is designed to multiplex electrical wiring in vehicles, saving on copper. It has many advantages, including the low cost and ease of use.
In most modern cars, the CAN protocol is used to communicate with a variety of systems, including the engine management system (EMS) steering module, transmission controller, air conditioning controls and many more. It also transmits sensor data including speed sensors and inputs, to control different features of the car. The CAN bus can be used to monitor the health of these different components and could stop the vehicle from starting when it is in danger of failure.
It's crucial to understand how the CAN bus works and how it is secured. Using CAN bus can be an excellent way to add new features to your vehicle, but it's essential to secure it from threats like hackers and other hacker. The best way to achieve this is to install firewalls and monitoring your CAN bus using software.
Ghost2's discrete control unit is hidden within the dashboard or wiring harness, which prevents thieves from physically tampering with it. It's also impossible to reset the PIN or emergency code without access to the vehicle.
If you need to hand over your vehicle to a valet parking service, maintenance, or any other reason, you can turn on the Transport Mode. This feature will disable the Ghost immobiliser's keyfob and ignition functions, and will only be activated when the vehicle reaches 31 mph for 15 minutes.
How to create a PIN code
The Ghost immobiliser protects your car from thieves. The innovative technology uses an PIN to shut down the engine of the vehicle and stop it starting without the correct code or an authorized fob or mobile. Its discrete design ensures the system is inconspicuous and offers unbeatable security against theft. Moreover the system is TASSA certified and can result in significant savings on car insurance premiums.
During installation when you install the Ghost system goes into an learning mode that records the sequence of buttons that are pressed to create your unique pin code. The installer will guide you through activating the system once the pin code has been created. Once activated, the Ghost system will disable your vehicle's starting motor until you enter a valid pin or switch the vehicle to transport mode. This makes it difficult for thieves or cloners who want to hack or duplicate the starter system of your vehicle.
Installing an Ghost immobiliser is easy however it is essential to follow the detailed instructions in the user's manual to ensure proper operation. Multimeters and basic hand tools are a good way to check electrical values. Insulation tape, heat shrink tubing and cable ties can be used to protect exposed wiring. Also, be sure to check the system regularly to identify any problems and potential mistakes.
It is crucial to check the system one final time before you turn on the ignition. Ghost immobilisers will arm themselves after a period of 3 to 30 seconds, depending on the model of the vehicle. The system also comes with a Service/Valet Mode which allows you to temporarily remove the system for servicing or valet parking.
The immobiliser can be hidden under the dashboard or behind the steering wheel. Use a small amount of tape or paint on the CAN H and L wires to make them easier to find when you are testing. The CAN H and L wires must also be connected to an electrical source that provides continuous 12V. It is essential to test the connections again after testing as the incorrect identification of these wires could cause the system malfunction.
Invoking ghost immobiliser review stops your vehicle from starting unless you press a sequence of buttons inside the vehicle, usually the steering wheel, door panel, or central console. The sequence can be changed by the user in case it is needed. Once the system is activated, it is not able to be disabled by thieves and is a great choice for anyone who wants to secure their vehicle from theft.
The system is designed to be undetectable. This means it can't be detected by modern diagnostics or code-grabbing technologies. It does not emit radio frequencies either making it even more difficult for thieves detect.
If the device is discovered it will stop the engine from starting. It will also sound an alarm to scare the thief away. The device can be used to track the location of the vehicle and help police track it down if it is stolen.
If you are interested in a ghost immobiliser get in touch with the experts at Car Specalist Customs to get an estimate and discuss your options. We are able to install ghost immobilisers in your vehicle. We will ensure that it is placed in an area that is hard to reach. We also offer other security measures, such as a wheel lock and kill switch to keep your car safe from thieves.
Disarming the System
It is essential to know how to deactivate a Ghost immobiliser, if it's fitted to your car. It can be used in case you forget your keys or the battery in your car fails. The system uses a unique PIN code that only you know, so the immobiliser won't start your vehicle unless you enter this code. Pressing a combination buttons on the dashboard or steering wheel is the most efficient method to enter your code. This is much easier than using a key fob, and stops others from copying your remote.
Contrary to other aftermarket immobilisers which require cutting wires to install, Ghost2 is non-invasive and is compatible with your vehicle's bus network to operate. Its standout characteristic is its ability to bypass the engine without affecting the normal functions, making it hard for thieves to use signal boosters to clone your car key. Furthermore, it doesn't emit radio frequencies, which means thieves can't detect the system.
The Ghost system has the option of a Transport Mode that lets you temporarily disable security for certain situations such as transportation or service. This feature is a great option if you need to lend your vehicle to a person who isn't sharing the PIN number or if you want to keep your vehicle secure while driving it. To activate the Transport Mode you need to press the service button five times within a period of 2 seconds. The Ghost system will confirm activation via five indication signals.
Keep the emergency code inside your vehicle in a safe place. If you are ever locked out of your vehicle, you can call the technician or company who installed the system, and they will give you the code. If they are not able to contact you You can always attempt to contact an authorized dealer, but this will involve verification procedures and could result in additional fees.
This system is not only useful, but it will also help protect your vehicle from theft, and also reduce the cost of insurance. Numerous insurance companies offer reduced costs or financial incentives for those who install this anti-theft system.