Autowatch Ghost Immobiliser
The renowned Ghost Immobiliser provides your vehicle with the most advanced security against key cloning hacking, theft and hacking. This TASSA-verified system is undetectable by thieves and blocks your vehicle from starting.
This silent device makes use of buttons on your vehicle's steering wheel, doors and the centre console to allow you to set a unique changeable PIN code sequence up to 20 characters. The code must be entered before the car can begin.
Easy to install
It is more important than ever that you protect your vehicle. With car crimes increasing and cloning tools readily available, it's essential to do so. Our Autowatch Ghost immobiliser provides a secure, efficient and affordable solution to guard against key-cloning and vehicle theft. The unit is almost undetectable to thieves and operates via buttons that are already present in the steering wheel and door panels as well as the centre console. This allows customers to create a unique sequence of disarming similar to the credit card which must be entered before the vehicle can be started or driven away. This makes it virtually impossible to detect, and is not affected by jamming devices or spoofing devices, like other systems.
The installation of the Ghost unit is a highly-specialized procedure that should only be completed by an approved installer. The unit is carefully integrated into your vehicle's CAN bus network, ensuring that it communicates directly with the ECU. This allows the Ghost to be installed without changing the factory settings and guarantees that it cannot be bypassed by a criminal using signal boosters or other techniques.
After the Ghost has been installed after installation, you must use a different and more efficient disarming sequence in order to activate your vehicle. Press the service button five times in 2 seconds, but make sure that you don't hold it for too long. The system will flash twice to indicate that Transport Mode is active. This feature is ideal for classic, sports or prestige vehicles that require their security system to be temporarily disabled while transport or servicing.
After Transport Mode has been activated the immobiliser is turned off and cannot be reactivated by entering your PIN again. This feature is great for those who would like to store their vehicle over winter, preventing it from being taken by thieves or having to deal with monthly increases in insurance premiums.
There are no keyfobs or LEDs, or other indicators to assist you in finding it.
The Ghost immobiliser guards your vehicle from thieves by pressing buttons on the dashboard or steering wheel. You can enter a pin code without being noticed prior to starting the engine. It protects against attacks using signal relays, ECU swapping and key cloning and can be linked to a mobile application to arm or disarm remotely. It's easy to install and can be integrated to a variety of vehicles. It's also incredibly stealthy and can be concealed in a difficult-to-find location, such as behind the dashboard or within the trim of the steering wheel.
It's a great option for cars with high performance since it can shut off the ignition system of your vehicle if a wrong pin code is entered, which will stop thieves from driving off with your joy and pride. The device will even send an alert to your smartphone in the event that you've left your car without a key in public areas, giving you peace of mind while you're away from your vehicle.
The Ghost is different from other immobilisers because it does not require additional fobs or LED indicators. It is also able to be concealed in a hard-to-find area of your vehicle. It works by communicating directly with the vehicle's CAN data network, which makes it extremely resistant to detection. It does not emit radio signals, which means it is inaccessible to signal jammers or RF scanners.
It's designed to be tamper-proof and weatherproof, and can withstand extreme temperatures. It is also unaffected by tampering with by cutting wires or dismantling the unit. It's also inaccessible to organised gangs of thieves who employ diagnostics reading equipment to identify security systems. It's also not affected by professional auto diagnostics equipment which checks the CAN data system for the presence of an alarm device.
No circuit cuts
The ghost device does not have any indicators with LEDs or key fobs that would identify its location. It is hidden beneath the steering wheel, dashboard or dashboard of your car and uses buttons to generate a unique PIN sequence that has to be entered in order to start the engine. This means that even if a thief does have your keys they can't drive the car away since they do not be aware of the correct PIN sequence. The device cannot transmit radio signals, and therefore organized gangs of thieves using tools for reading diagnostics will be not able to detect it.
This cutting-edge immobiliser, which is also TASSA-approved, will help you reduce your insurance rates. This is especially relevant to vehicles whose owners have customised. It also wards off key cloning theft and ECU swapping meaning that the only way a thief can steal your joy and pride is to remove it.
Because the system does not utilize the factory key fobs or dashboard buttons it is an entirely silent device that communicates with your ECU via the CAN data circuit, which operates completely silently and doesn't even indicate that it's fitted. This means a thief can't replace the ECU or even add new key fobs in order to get your car to start.
If you ever forget your PIN code, our engineers have provided you with an emergency reset for the device which permits you to enter'service mode'. This will allow an expert or dealer to temporarily drive and start your vehicle, allowing them to perform maintenance work, MOTs or valet parking. When the technician is done or you have retrieved the vehicle, enter the PIN code to exit the service mode.
No radio signals
Contrary to many other car security systems the Ghost immobiliser does not use an alarm system or key fobs to stop vehicles from getting started. It communicates instead with the vehicle's ECU, the CAN data circuit as well as other circuits to stop the engine starting. It's a quiet solution that isn't affected by key-cloning techniques or radio frequency scanning techniques used by thieves to avoid security devices. It can also be integrated with tracking systems to improve the overall safety of your vehicle. ghost immobiliser review will also alert you to any attempted theft or tampering.
The Autowatch Ghost is a TASSA-certified device that is insurance approved and provides superior security against key hacking, copying, and even theft. It uses a mobile application to control the device. It is encrypted to ensure security. It has a secure emergency PIN override. It's a discrete efficient and cost-effective way to safeguard your vehicle from theft.
Ghost isn't without its problems. Many users have difficulty entering the correct sequence of disarming. The device requires input via buttons already in your vehicle, like the ones on the steering column or on the centre console. Users might find this difficult to remember or make a mistake, especially when the device is being used for the first time. It is recommended to study the manual that comes with the device to learn this and practice the process of disarming prior to driving the vehicle.
Another issue is that certain vehicles have problems with the CAN data connection, which could affect the functionality of the Ghost. This can be caused by faulty sensors or a damaged OBD port. It is recommended to check the system before using it, in case the CAN connection has any issues.
It is easy to change the PIN code
The ghost is an excellent device that has taken the market by storm but the pin code changing process can be a little confusing. The device is preprogrammed by the installer at the time of installation, however customers might want to alter it for various reasons. For example, they might prefer a different button that disarms the device or not want their installer to be aware. Or immobiliser ghost may simply dislike their current pin code. The good news is that the switching to a different pin number is incredibly easy. Follow the simple instructions below to find out how.
Be aware that you will have to turn off the ignition but DO NOT start your vehicle! It will take only just a few seconds to complete. The vehicle will then return to normal operation.