How to Install a Ghost Immobiliser
A ghost immobiliser guards your vehicle from key cloning or hacking. It works by stopping the engine from running until a PIN code is entered. This can be as long as 20 characters.
It is undetectable by thieves who don't expect this extra layer of security. Certain systems come with an app which allows the owner to deactivate their immobiliser in the event of forgetting their PIN code or to utilize the service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser is a cutting-edge security system that can be incorporated into your vehicle's ECU offering a secure line of defence against thieves. It is extremely efficient and user-friendly and is a great option to add to your vehicle's security arsenal. But, as with any other anti-theft device, it's not foolproof and requires regular maintenance to ensure proper operation. This guide will help you get the most of your Ghost 2 immobiliser.
CAN (Controller Area Network) is a reliable serial network that allows microcontrollers to communicate with each other over short distances without the need for central control units. It is designed to multiply electrical wiring in vehicles, saving on copper. It has many advantages, such as low cost and simple use.
In modern vehicles, the CAN protocol is used to connect with a variety of systems, such as the engine management system (EMS), steering module, transmission controller air conditioning controls, and many more. It also relays information from sensors, such as speed sensors and other inputs, to regulate the vehicle's various features. The CAN bus is used to monitor these diverse components, and prevent the vehicle from starting if they're in danger of failure.
It's crucial to understand how the CAN bus functions and how it is secured. It is possible to add additional features to a vehicle using CAN bus, but it's important to secure it from attacks from hackers and other dangers. The best way to accomplish this is to install a firewall and monitoring your CAN bus through software.
Ghost2's control unit is hidden within the dashboard or wiring harness, which prevents a thief from physically tampering it. It is also impossible to reset a PIN or an emergency code without access to the car.
If you have to give your car away for servicing, valet parking or for any other reason, you can activate the Transport Mode. This feature turns off both the keyfob and the ignition functions of the Ghost immobiliser. It will only reactivate after the vehicle has travelled 31 mph over a period of 15 minutes.
How to create a PIN code
The Ghost immobiliser shields your vehicle from theft. The innovative technology uses a PIN to shut down the vehicle's engine and prevent it from starting if you don't have the correct code, or an authorized fob/mobile. Its discreet design ensures that the system is inconspicuous and offers unbeatable security against theft. Furthermore the system is TASSA verified and can result in significant savings on car insurance premiums.
During installation, Ghost enters a "learning mode" to record the sequences of buttons that are pressed to generate your unique pin codes. Once the pin code has been created, the installer will then guide you through the process of activating the system. Once activated, the Ghost system disables your vehicle's starting motor unless you enter a valid pin or switch the vehicle to transport mode. This makes it very difficult for thieves to duplicate or hack into your vehicle's start system.
Installing a Ghost immobiliser is straightforward but it is crucial to follow the precise instructions in the user guide to ensure proper operation. Multimeters and hand tools can be used to check electrical values. Insulation tape as well as heat shrink tubing and cable ties are a good option to protect exposed wiring. Check the system on a regular basis to identify any issues that could be.
It is essential to check the system one final time before turning on the ignition. The Ghost immobiliser will arm itself after 3 to 30 seconds, based on the vehicle's model. The system also comes with a Service/Valet mode that allows you to temporarily disable the system while you are servicing your vehicle or parking valet.
Ideally, the immobiliser should be concealed in a hidden location beneath the dashboard or steering wheel. Use a small piece duct tape or paint on the wires CAN H and L to make them easier to locate during testing. The CAN H and the L wires should be connected to an electrical source that provides a constant 12V. It is important to check the connections after testing because an the incorrect identification of these wires could cause the system malfunction.
The system must be activated
A ghost immobiliser blocks your car from starting unless you press a set of buttons within the car typically the steering wheel, door panel, or central console. The sequence can be altered by the user at any time. Once ghost immobiliser for sale is activated, it cannot be deactivated by thieves which makes it a great choice for anyone who wants to safeguard their vehicle from theft.
The system is designed not to be able to be detected by modern diagnostic tools and code-grabbing technologies. ghost immobiliser for sale does not emit radio frequencies making it even more difficult for thieves detect.
If the device is discovered it will stop the engine from starting. It will also sound an alarm to scare the burglar away. The device can be used to monitor the location of a car and assist in the recovery of the vehicle if it is taken.
If you're interested in a ghost immobiliser, contact the experts at Car Specalist Customs to get an estimate and discuss your options. We are fully qualified to install a ghost immobiliser to your vehicle, and will make sure it is hidden in a difficult-to-access area. We can also provide other security measures, such as a wheel lock and kill switch to protect your vehicle from thieves.
Disarming the system
It is essential to know how to disarm a Ghost immobiliser if fitted to your car. This is useful in case you forget your keys or your car battery fails. The system utilizes an individual PIN code that only you know, so the immobiliser will not start your vehicle without entering this code. The easiest way to enter the code is to press a set of buttons on your dashboard or the steering wheel. This is much easier than using a key fob, and keeps others from copying the remote.
Ghost2 is not intrusive unlike some aftermarket immobilisers that require cutting wires for installation. It also integrates with the CAN bus system of your vehicle to function. Its most notable feature is that it shuts off the engine without affecting normal functions of the vehicle. This makes it difficult for thieves to use signal boosts or duplicate keys to car keys. It doesn't emit radio frequencies, which means thieves are unable to detect it.
The Ghost system has an option called Transport Mode that lets you temporarily disable security in situations like transportation or service. This is a great option if you want to lend your vehicle to someone without sharing the PIN code or when you wish to ensure your vehicle is secure while driving it. Press the button five times within 2 seconds to activate the Transport Mode. The Ghost system will confirm activation with five indication signals.
Keep the emergency code inside your vehicle in a safe location. If you ever find yourself locked out of your vehicle, you can call the technician or company who installed the system, and they'll give you the code. If they are not able to contact you then you can attempt to contact an authorized dealer however this will require verification procedures and may incur additional fees.
This system isn't just useful, but it will also safeguard your vehicle from theft, and also reduce the cost of insurance. Numerous insurance companies offer reduced premiums or financial incentives to install this anti-theft system.